Problems with my Interface

Plautus · 04-21-2016, 01:33 PM

At least I think it's the interface.
It's about my vocal recordings.

1. output seems too quiet.
2. if I increase gain to my desireted volume, I get clipping immidiately
3. If I use low gain, and increase db in audio program I get background noise
4. I always get high pitched noise in the background when playing my vocal records in daw's and other recording programs.

My specs:
Rode Nt1
Focusrite Scarlett solo

and my pc is a beast

Zitterbart · 05-10-2016, 06:11 AM

Does the Rode go into the Scarlett solo via XLR or Line-In? Do you need/use phantom power? I am not sure what happens if you put 48 V phantom power into a Mic which was built for 24 V phantom power, but I would be careful with this. So read in the specs what is the right amount of phantom power to use (24 V, 48 V, none, other). Usually condenser microphones need phantom power.
Another thought: Did you ever drop the mic?

Plautus · 05-25-2016, 06:57 AM

I own samsung Go mic. Get distortions when I am on my bed. Why?

Tokushi · 03-08-2024, 01:11 AM

Output seems too quiet: Ensure that your input gain on the Scarlett Solo is set correctly. You want it high enough to capture a strong signal but not so high that it clips. Start with a low gain setting and gradually increase it while monitoring your levels.

Clipping when increasing gain: If you're getting clipping even at low gain settings, try moving further away from the microphone or singing/playing less loudly. You can also try enabling the pad on the Scarlett Solo if your microphone has one.

Background noise: If you're hearing background noise when you increase the volume in your audio program, it could be due to a noisy environment or electronic interference. Make sure you're recording in a quiet room and try using a different USB cable or port for your Scarlett Solo.

High-pitched noise: This could be caused by interference from other electronic devices or a ground loop. Try unplugging other devices from the same power outlet or using a ground loop isolator between your Scarlett Solo and your computer.

If these tips don't solve your issues, it might be worth checking the settings in your recording software and experimenting with different microphone placements.

04-21-2016, 01:33 PM	#1 (permalink)
Plautus Groupie Join Date: Dec 2015 Posts: 4	Problems with my Interface At least I think it's the interface. It's about my vocal recordings. 1. output seems too quiet. 2. if I increase gain to my desireted volume, I get clipping immidiately 3. If I use low gain, and increase db in audio program I get background noise 4. I always get high pitched noise in the background when playing my vocal records in daw's and other recording programs. My specs: Rode Nt1 Focusrite Scarlett solo and my pc is a beast

05-10-2016, 06:11 AM	#2 (permalink)
Zitterbart Groupie Join Date: May 2016 Location: Germany Posts: 22	Does the Rode go into the Scarlett solo via XLR or Line-In? Do you need/use phantom power? I am not sure what happens if you put 48 V phantom power into a Mic which was built for 24 V phantom power, but I would be careful with this. So read in the specs what is the right amount of phantom power to use (24 V, 48 V, none, other). Usually condenser microphones need phantom power. Another thought: Did you ever drop the mic? __________________ Turtles are fast. Turtles are dangerous!

05-25-2016, 06:57 AM	#3 (permalink)
Plautus Groupie Join Date: Dec 2015 Posts: 4	distoritions on records I own samsung Go mic. Get distortions when I am on my bed. Why?

03-08-2024, 01:11 AM	#4 (permalink)
Tokushi Music Addict Join Date: Jun 2023 Posts: 59	Output seems too quiet: Ensure that your input gain on the Scarlett Solo is set correctly. You want it high enough to capture a strong signal but not so high that it clips. Start with a low gain setting and gradually increase it while monitoring your levels. Clipping when increasing gain: If you're getting clipping even at low gain settings, try moving further away from the microphone or singing/playing less loudly. You can also try enabling the pad on the Scarlett Solo if your microphone has one. Background noise: If you're hearing background noise when you increase the volume in your audio program, it could be due to a noisy environment or electronic interference. Make sure you're recording in a quiet room and try using a different USB cable or port for your Scarlett Solo. High-pitched noise: This could be caused by interference from other electronic devices or a ground loop. Try unplugging other devices from the same power outlet or using a ground loop isolator between your Scarlett Solo and your computer. If these tips don't solve your issues, it might be worth checking the settings in your recording software and experimenting with different microphone placements.