Music Banter - View Single Post

ZIONICS · 12-17-2012, 06:28 PM

Thread if you are referring to the Eko K2 (13 pedal board) or K3 (20) pedal board,you can replace the springs by unsoldering the damaged ones and replacing them with "THE NO 6 ELECTRIC GUITAR STRINGS CUT TO SIZE AND WELDED IN"It must be a big gauge.Depending on how you solder it it can last for ever.I have both the K2 and K3 pedals.To avoid damage to them I have removed the electronics and switches into a module box and I connect that to the pesals.I have converted the K3 to midi as well.So the separate module box is also able to provide different bass tones from slap to whatever you might need.Cheers.

12-17-2012, 06:28 PM	#2 (permalink)
ZIONICS Groupie Join Date: Dec 2012 Posts: 1	Eko bass pedal Thread if you are referring to the Eko K2 (13 pedal board) or K3 (20) pedal board,you can replace the springs by unsoldering the damaged ones and replacing them with "THE NO 6 ELECTRIC GUITAR STRINGS CUT TO SIZE AND WELDED IN"It must be a big gauge.Depending on how you solder it it can last for ever.I have both the K2 and K3 pedals.To avoid damage to them I have removed the electronics and switches into a module box and I connect that to the pesals.I have converted the K3 to midi as well.So the separate module box is also able to provide different bass tones from slap to whatever you might need.Cheers.