Quote:
Originally Posted by mr dave
is the nut still really tight in the gap or can you pop it out? if you can pop it out smoothly then you should be able to thin it out enough to get it to fit smoothly. if it's tight you want to be careful to make sure you don't end up causing damage to the fretboard by cracking or splintering the edge.
|
I just fixed it by removing it and putting it in by sliding it in from the side. To answer your question, it wasn't easy to get out or get back in. I think it was made to be slid in, I must have never put it in right.
I think I'll buy a new one, though, because with it in properly the .012 gauge strings vibrate against the first couple frets.