![]() |
i don't think that is the case. i really doubt memturbo is the issue here. but i haven't ever gotten a "out of memory" error(never heard of such an error, i would think it would just use the pagefile). and i don't know of what program i would run to max out my memory, do you? i did some googling a while back and this is a problem that other W7 users have had. some program is messed up and keeps taking more ram. plus, i have the pirated version of memturbo so i doubt it even more. i actually like the program a lot. good to keep track of, especially with only 4gb running w7.
|
Quote:
If the programs that are running on your computer are using all your RAM... you will absolutely not be able to open a new program. You would get an error. 2. You don't know you have a problem until you actually have a problem. If I were you, I would let it run until you have a problem. When you have a problem, that's when you should worry. But for the sake of wanting to figure out why it seems your RAM is consistently being filled up by some unknown program leaking code into it or something, Try uninstalling the ram program you've installed and monitoring your RAM usage from the task manager. If it STILL shows the same thing, you might want to do the obvious first and scan for viruses and spyware, then take it from there. 3. The reason you would want to uninstall the ram program you have, or at LEAST not run it while you're monitoring your ram usage is because all deviousness aside, it could be the very program causing the RAM leak. Best to start there... as I'm assuming you never had any issues until you noticed the "problem" after you installed the program, correct? Or... |
the problem i notice when the ram monitor goes low is that my computer gets very slow. i always thought that the pagefile was only used when the RAM was maxed out. and i noticed that my computer would sometimes get very slow before i installed the program to monitor it. i didn't just install it on a whim.
edit: i haven't ever noticed it showing my ram at lower than 600mb or so. edit 2: i don't have viruses/spyware(and spyware wouldn't cause this). |
Quote:
I used to use Serious Samurize, which is a customizable monitor sort of like the program you use, except it just monitors and does nothing else. It's definitely a good thing to have if you want to see what's going on, and far better than the skimpy info task manager gives you. So I can relate there. But aside from already knowing the page file gets used without maxing the ram, you can see it clearly with a decent monitor. But if your problem truly is a memory leak from a legitimate program, you might just have to do it the old fashioned way by process of elimination. I guess what would make it easier is if you can remember about when you started having the issue and try to remember which programs you've added since then. Then just disable them, like you said, until the problem stops. It's a legitimate troubleshooting technique. Btw, what virus program do you use? |
the weird thing is, sometimes i am fine for days on end with my memory. but other times, it gradually decreases. maybe i should use that serious samurize instead(i don't really use the defrag/free as it usually only frees up 100-200mb or so), i assume it is freeware? if it is a legit memory leak i dunno, probably don't wanna bother with that. i have had this problem for a long time and i haven't really added any programs for a long time so that isn't gonna help me much. i use ESET Smart Security.
|
Quote:
As for the memory problem... I see 2 possible explanations. The first is that you have some poorly written program which is leaking memory (i.e. being allocated memory but never releasing it) - Firefox used to be notorious for this. But I seriously seriously doubt it could account for that much memory unless you're running your system for days at a time without restart. The second, more likely explanation is that you have some malware which is intentionally hogging memory. And some programs insist on using the page file, even if your system hasn't allocated all of the RAM available. I'd try the program Freebase mentioned to figure out which process is the culprit. EDIT: You say you do run your system for days at a time? |
the thing is, i have reinstalled multiple times within the past year so i really doubt it is malware. i have had the issue quickly after reinstalling every time. the program i am the most suspicious of is jdownloader, but it is so convenient for downloads. what programs do you guys use as download helpers(automatically wait for time limits to expire and automatically start download links?).
|
http://img571.imageshack.us/img571/4424/thisx.jpg
this is the probable culprit. do you guys have a similar program? it's amazing. |
Oh that's a bummer. My flatmate had a problem with his Win7 system randomly restarting, which persisted through several formats. The only way he could diagnose it was by doing a fresh format and installing each of his 'regular' programs (Firefox, uTorrent, MS Office etc.) one at a time to detect which was the culprit.
I'm not using any download manager atm, but I used to use JDownloader and it seemed fine. |
Quote:
|
Btw trace, JDownloader is written in Java which makes it slightly harder (but certainly not impossible) for it to have memory leaks. When you run taskmgr, do you see an instance of java.exe/javaw.exe hogging a truckload of memory?
|
Quote:
|
What is svchost.exe And Why Is It Running? - How-To Geek
Notice the important line about disabling un-needed services... then check this out: Windows 7 Services that can be Safely Set to MANUAL - Tweaking with Vishal Then follow up with: http://www.theeldergeek.com/services_guide.htm (even though it's for XP, there's still a lot of relevance) Edit: Not sure about Windows 7, but you might have to run services.msc to see all the services represented in the elder geek thing. |
svchost is a program used by Windows to host inbuilt Windows services (which could be running a desktop theme, Windows Defender or font support). It's quite normal to have 10 instances of svchost using a fair bit of memory in total. It is possible for malware to disguise itself as an svchost.exe instance, but like you said, it's probably not malware if the problem is persisting across formats.
This program might give you a little more info than taskmgr as to where your memory is going. Try it - it even shows you which services are being hosted by each svchost instance. |
Yea, I tried to told him but he didn't wanna heard me.
In any regard, disabling unneeded services can help with the massive svchost thing. Edit: Sweet program, Seltzer. I didn't know about it. Shit... now I wish I had a computer problem. :( |
Quote:
|
Quote:
Something else is going on. For having 4 GB of Ram and doing what any standard computer user does, including myself, you shouldn't be running out of RAM. |
serious samurize doesn't work on w7. fuckin w7 64bit is a pain in my ass.
edit: compatibility mode s'ok. |
freebase, wanna tell me how to have it display the free ram in the windows notification area? i added the meter in the editor. what option do i check to show it as that?
|
Quote:
|
Like I said, it has been years. I don't even have the program anymore. Check to see if there are any guides there on their site. I remember spending hours tweaking it when I first got it. But yea, when you save your meters in the editor, you should be able to open it from the icon down in the task bar.
|
maybe i will try to find something else first as this is a bit of a pain. but thanks regardless.
|
i quit on samurize and got drivegleam. works well afaik.
|
okay, I like to animate in my spare time using Blender3D open source suite, but in 2.53 Beta I can't find the Box select or the brush select. WTF? those are my most used tools! is it under a new name because of the 2.4x to 2.5x switch or what? please help, i'm confused.
(if you have no clue about what the hell i'm saying, click here) |
GAAARGH!
nobody here's a Blender user! :banghead: |
I don't use it, but maybe there's something you can tick off in the View menu to show you all the tools?
Also, you might have luck at the Blender forums if they have one. |
Quote:
(there's also a tool search function. might be in there.) Oh, and a lot of the people on the blender forums get real mad if you're not a pro at everything. they're a bit arrogant at times. |
i just realized the other day that i can get extensions for chrome. there are some good ones like: double click on word for dictionary and a gmail inbox thingy. you guys know of some good ones?
|
The webcam problem has crept up again. unknown to me that the one I downloaded was a trial and the trial has ran out, I can't find any FREE ones to download so subsequently I'm left with no cam :( helpppp prettiest please in the whole wide world.
|
Quote:
|
i picked up the adblock too, it wasn't sexy enough to be included in my post.
|
Security Update for Microsoft Works 9 (KB2092914)
Installation date: 8/16/2010 10:30 PM Installation status: Failed Error details: Code 646 Update type: Important A security vulnerability exists in Microsoft Works 9 that could allow arbitrary code to run when a maliciously modified file is opened. This update resolves that vulnerability. More information: Microsoft Security Bulletin MS10-056 - Critical: Vulnerabilities in Microsoft Office Word Could Allow Remote Code Execution (2269638) Help and Support: MS10-056: Description of the security update for Works 9: August 9, 2010 More update problems....... |
|
I guess i do.. But, I just need help...
|
i'm not exactly sure why you would need a security update for fucking windows works.
to possibly help in this error, my only advice would be to go into the control panel and see if the update shows as installed there. if it is, uninstall it then go to windows update to check for updates again. you could try reinstalling it. past that maybe search online for the update and you could stumble on the microsoft post about it. but my recommendation would be to uninstall the windows office programs and get openoffice. i'm not positive, but i bet your files from the other programs are compatible with it. |
all I know is it acting like it needs it. and it is Peeving me off.. lol
|
Quote:
all I did was Just delete the whole thing and downloaded this. Thanks much;) |
This isn't really a problem but does anyone know how to burn a protected DVDs on to the hard drive of the computer, so I can watch it without the disk. I have looked on the internet for ways to do this but all the programs seem complicated and don't tell me whether I can actually do it or not.
|
Can you use an external hard drive on a laptop?
|
Quote:
|
| All times are GMT -6. The time now is 06:44 PM. |
© 2003-2025 Advameg, Inc.