Music Banter

Music Banter (https://www.musicbanter.com/)
-   The Lounge (https://www.musicbanter.com/lounge/)
-   -   Your Day (https://www.musicbanter.com/lounge/8425-your-day.html)

FRED HALE SR. 04-23-2013 11:14 AM

Quote:

Originally Posted by Plankton (Post 1310277)
I picked up a '97 Buick Century for the daughter. Easy to work on, and parts are relatively cheap. Did her brakes over the weekend and found out she needs a sway arm. $80 for the whole kit. Not too shabby.



Whats the make/model/year? We could easily check into it.

80 Bucks is dirt cheap for a sway bar kit. You can usually just buy replacement end link kits and frame bushings too, usually run about 25-30 bucks and tightens the frt end back up.

Burning Down 04-23-2013 11:15 AM

Quote:

Originally Posted by Plankton (Post 1310277)
Whats the make/model/year? We could easily check into it.

2000 Volvo S70 T5. Needs new brakes too... I called my dad and he said he can do all of that for me but I'll have to wait till the weekend and then leave it with him for a couple of days. Not a problem but I just don't want to take the bus if I have to go somewhere lol.

Burning Down 04-23-2013 11:17 AM

Quote:

Originally Posted by FRED HALE SR. (Post 1310289)
What is your boyfriend good for if he can't change a serpentine belt? They are fairly simple and usually just require removing one bolt from the idler pulley setup.

He works so hard and I thought I'd give him a break... maybe I'll go back to the kitchen and make him a nice sandwich and get him a beer.

FRED HALE SR. 04-23-2013 11:18 AM

Quote:

Originally Posted by Burning Down (Post 1310291)
2000 Volvo S70 T5. Needs new brakes too... I called my dad and he said he can do all of that for me but I'll have to wait till the weekend and then leave it with him for a couple of days. Not a problem but I just don't want to take the bus if I have to go somewhere lol.

You should send your boyfriend over to learn how to do this ****. Your dad shouldn't be doing this **** on weekends when you have a perfectly healthy 20ish year old boyfriend. :wave: Thank God for pops though. :beer:

Burning Down 04-23-2013 11:29 AM

Quote:

Originally Posted by FRED HALE SR. (Post 1310293)
You should send your boyfriend over to learn how to do this ****. Your dad shouldn't be doing this **** on weekends when you have a perfectly healthy 20ish year old boyfriend. :wave: Thank God for pops though. :beer:

I could... and I might, hahaha. You're saying I should basically have him whipped, right? :laughing:

My dad has nothing better to do on his weekends than to do routine engine maintenance at no charge, lol.

FRED HALE SR. 04-23-2013 11:31 AM

Quote:

Originally Posted by Burning Down (Post 1310295)
I could... and I might, hahaha. You're saying I should basically have him whipped, right? :laughing:

My dad has nothing better to do on his weekends than to do routine engine maintenance at no charge, lol.

Just as i suspected, one bolt on the tensioner pulley. Slide the belt off and replace with the new belt.

http://www.google.com/url?sa=t&rct=j...Q_8pZnG4xXVQeA

You should still have Yakov head over and help your dad. :wave:

Plankton 04-23-2013 11:43 AM

Quote:

Originally Posted by FRED HALE SR. (Post 1310290)
80 Bucks is dirt cheap for a sway bar kit. You can usually just buy replacement end link kits and frame bushings too, usually run about 25-30 bucks and tightens the frt end back up.

One of the end links was completely gone, and the bar itself rusted through and snapped on one end, so the whole kit is gonna be needed. You can tell this car sat for a long time before a buddy bought it at an auction. One of the things I was looking for was flood damage, and it didn't appear to be the case, just a bit of rust from sitting around in the elements for years, but it never dawned on me to look at the swaybar. The only reason I noticed it is when I took the wheel off to replace the pads.

Quote:

Originally Posted by Burning Down (Post 1310292)
He works so hard and I thought I'd give him a break... maybe I'll go back to the kitchen and make him a nice sandwich and get him a beer.

Now thats a good woman! Hope he appreciates you as much as you should be, and showers you with shoes and jewelry.

FRED HALE SR. 04-23-2013 11:48 AM

Quote:

Originally Posted by Plankton (Post 1310300)
One of the end links was completely gone, and the bar itself rusted through and snapped on one end, so the whole kit is gonna be needed. You can tell this car sat for a long time before a buddy bought it at an auction. One of the things I was looking for was flood damage, and it didn't appear to be the case, just a bit of rust from sitting around in the elements for years, but it never dawned on me to look at the swaybar. The only reason I noticed it is when I took the wheel off to replace the pads.



Now thats a good woman! Hope he appreciates you as much as you should be, and showers you with shoes and jewelry.

Wow thats scary. Might wanna check the strut rod bushings also. Sounds like you checked everything I would have. The main issue is always gonna be no frame damage. Sounds like a decent purchase.

I almost forgot a neighborhood stray cat I always fed and laid out a warm bed outside in winter passed on this weekend due to old age. RIP My Lil Buddy. You'll be missed old timer.

Burning Down 04-23-2013 11:53 AM

Quote:

Originally Posted by FRED HALE SR. (Post 1310296)
Just as i suspected, one bolt on the tensioner pulley. Slide the belt off and replace with the new belt.

http://www.google.com/url?sa=t&rct=j...Q_8pZnG4xXVQeA

Yeah I could do that myself. But my dad said he would do it for me, plus the brakes, so I took him up on the offer.

Quote:

Originally Posted by FRED HALE SR. (Post 1310296)
You should still have Yakov head over and help your dad. :wave:

Eastern bloc boy, Yakov... how many more names are in your arsenal now? :rofl:

Plankton 04-23-2013 11:57 AM

Quote:

Originally Posted by FRED HALE SR. (Post 1310301)
Wow thats scary. Might wanna check the strut rod bushings also. Sounds like you checked everything I would have. The main issue is always gonna be no frame damage. Sounds like a decent purchase.

I almost forgot a neighborhood stray cat I always fed and laid out a warm bed outside in winter passed on this weekend due to old age. RIP My Lil Buddy. You'll be missed old timer.

It's not really a risk issue at this point, just makes the car ride like a boat on water for now. The coolant overflow was gummed up with oil, so I knew it had blown a head gasket, and had been replaced at some point, and that was conveyed to me from the get-go by my buddy that sold it to me. Just a few minor issues, but other than that it wasn't bad for the price.

Sorry to hear about your little friend. R.I.P. kitty.


All times are GMT -6. The time now is 09:16 PM.


© 2003-2025 Advameg, Inc.