Music Banter

Music Banter (https://www.musicbanter.com/)
-   Stereo & Production Equipment (https://www.musicbanter.com/stereo-production-equipment/)
-   -   Trouble With Stereo Sound Out of Computer (https://www.musicbanter.com/stereo-production-equipment/54046-trouble-stereo-sound-out-computer.html)

Klaus2420 01-26-2011 10:42 AM

Trouble With Stereo Sound Out of Computer
 
I just recently started recording music with Sony ACID music studio 8 and I played my guitar plugged directly into my computer. The recording is set in stereo but it only records sound through the left channel. I couldn't find out why till I went to my audio driver and found the settings were set to have the left audio input full and the right input down to about 1/4. The problem is when I adjust this setting and go back into the music studio to record it automatically readjust to the one sided setting. I cant reset the defaults on the audio driver. The driver is Realtek HD Audio Manager. Let me know if you have any suggestions to a different driver that works with Windows XP and will fix this problem.

Batty 01-26-2011 05:10 PM

Your Guitar is probably mono

s_k 01-26-2011 05:25 PM

Exactly :).
Most guitars are mono, they're just like one microphone.
Or you're using a mono plug.
pretty easy to recognize:
http://ecx.images-amazon.com/images/...500_AA300_.jpg
One black ring, mono

http://img.tweedehands.nl/f/normal/8...ulp-ingang.jpg
Two black rings, stereo.

Freebase Dali 01-26-2011 07:05 PM

Quote:

Originally Posted by Batty (Post 991980)
Your Guitar is probably mono

:rofl:

To the OP:

Yea, direct guitar signals are mono. Set Acid to record in mono, and your signal should be straight up the middle. If you want to achieve stereo spread, you can simply record another track along to the original, in mono, then pan each track opposite of each other. That will sound better, or as good as recording directly from your guitar could ever sound. (unless you're planning on using an amp simulator, in which your guitar signal doesn't need to be stereo to begin with)
Simply using a stereo TRS connector and recording in stereo isn't going to be any different than recording in mono and duplicating the track and panning each track hard opposite. It will sound exactly like a single mono recording, as both signals are identical and will present themselves as directly centered in the stereo field. (Unless you alter one tracks volume, which is essentially the same thing as panning to a side) And you probably don't want to duplicate them anyway because of the possibility of frequency cancellation, which will result in a lowered output of your signal while not doing anything productive with it unless you're planning on filtering each track differently.

Of course, if you actually meant "I played my guitar through an amplifier plugged directly into my computer", then your output from your amp's headphone port, or line-level output, should be connected to your LINE-LEVEL input on your sound card, via a stereo cable with what I'm assuming will be a 1/8 inch TRS port if it's a built in sound card, and probably a 1/4 inch port on your amp.
In this scenario, you'll want to set Acid to record in stereo... mostly if there are any stereo effects employed in the amp, like delay or reverb.


All times are GMT -6. The time now is 02:50 AM.


© 2003-2024 Advameg, Inc.