Adding subwoofer to different speakers - Music Banter Music Banter

Go Back   Music Banter > Artists Corner > Stereo & Production Equipment
Register Blogging Search Today's Posts Mark Forums Read
Welcome to Music Banter Forum! Make sure to register - it's free and very quick! You have to register before you can post and participate in our discussions with over 70,000 other registered members. After you create your free account, you will be able to customize many options, you will have the full access to over 1,100,000 posts.

Reply
 
Thread Tools Display Modes
Old 09-06-2013, 10:52 AM   #1 (permalink)
Groupie
 
Join Date: Jun 2013
Posts: 12
Default Adding subwoofer to different speakers

Currently have Creative Gigworks T20 speakers. Low bass is a little lacking.

Considering adding a subwoofer. Would adding a Yamaha 50w Subwoofer ruin it? As in would there be a minor delay between the two or would it just sound muddy/not very good in general? If you want to know which one I'm talking about (not enough posts to put links, search Yamaha YSTFSW050BL on Amazon.

Or would it work? If that one is more suited to movies rather than music, is there a different one that I could use?

Please don't suggest new speakers. I absolutely love the clarity on these. I would rather spend £60 on a decent subwoofer (no VAT for me) than £60 on entirely new speakers with less clarity.

Sorry if this is the wrong place. If there is a better sub forum for this, please move it/advise me on how to move it.

Thanks!
Reign of Tachos is offline   Reply With Quote
Old 09-07-2013, 11:39 AM   #2 (permalink)
Partying on the inside
 
Freebase Dali's Avatar
 
Join Date: Mar 2009
Posts: 5,584
Default

If you can find a sub with at LEAST an 8.5 inch speaker (10 would be preferable) AND an adjustable crossover, you could definitely improve the situation. You want a speaker large enough to actually be able to reproduce the lower frequencies you're needing without simply creating a nasty sounding resonator box like a lot of the cheap subs with small speakers do. The adjustable crossover will let you dictate at which frequency point the lows are sent to the sub and everything above that point, sent to the main speakers. This will allow you to dial in the best balance between your sub and your speakers, rather than letting the sub dictate that for you, since the sub is not really in a position to know what sounds best for your application.

If you get a sub with a crossover, I'd set it somewhere right above 80 hz as a starting point, and just adjust up or down and listen to how it affects your speakers. Allowing the sub frequencies to be routed to your sub takes a lot of stress off your desktop speakers and lets them open up. You'll hear a big improvement on them.
Secondly, resist the urge to drive the sub hard. You want balance, not boom. The whole goal is to let the whole frequency range be represented by extending the frequency reproductive capability below what your desktop speakers are capable of reproducing, so with that in mind, make your decision based on that ability...

Which means you need a speaker large enough to reproduce those low frequencies (not necessarily amped enough to push them hard) and the ability to adjust the crossover point at which certain frequencies will be handled by the sub, and the rest by your speakers.

Hope that helps a little.
__________________
Freebase Dali is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Similar Threads



© 2003-2024 Advameg, Inc.