Music Banter

Music Banter (https://www.musicbanter.com/)
-   Talk Instruments (https://www.musicbanter.com/talk-instruments/)
-   -   Question (https://www.musicbanter.com/talk-instruments/26748-question.html)

ZeppelinAir 12-20-2007 05:38 PM

Question
 
what kind of polish can i use on the guitar, i havent polished it before and i am not sure what to use, i dont know if somthing might ruin and of the metalic parts on it, and what could i use on the wooden fretboard, what can get rid of scratches

sleepy jack 12-20-2007 05:44 PM

Go to your music store and pick up a cleaning kit. I got one there and it had polish for my guitar in it.

littleknowitall 12-21-2007 03:50 AM

Standard polish is usually fine mind you. Depending what finish your guitar has.

ZeppelinAir 12-23-2007 12:47 AM

Quote:

Originally Posted by Crowquill (Post 423986)
Go to your music store and pick up a cleaning kit. I got one there and it had polish for my guitar in it.

not one around for miles, so i needed to what kind of polish would work beside some made for the guitars

PerFeCTioNThrUSileNCe 12-26-2007 11:41 AM

Well...first off, what kind of guitar is it? and what kind of finish does it have?


If it has a thick, highly glossy, nitrocellulose or polyurethane finish (like you would see on most electric guitars) then you can use a number of different things. I've used this Meguiars CAR polish on my guitars. Makes 'em look amazing. Carnauba wax helps protect the clearcoat, and it shines up the guitar like you wouldn't believe.

I wouldn't suggest using actual Turtle Wax on your guitar though...I'm pretty sure automotive clearcoats are more durable than that of guitars. Try the Meguiars stuff though. It comes in a maroon spray bottle.

Scratches on guitar's are hard to get rid of, especially if they're large. If you've got polishing compound and a buffer, try that on an inconspicuous spot on the guitar (ie take off the neck plate and do it under there) to make sure it doesn't ruin your clearcoat. Then if it doesn't....go ahead and try it on the finish where the scratch is. Keep in mind that most guitars with high gloss finishes have something like 9 or 10 coats of nitrocellulose/polyurethane clearcoat on them so unless you get way too happy with the polishing compound, you shouldn't have a problem ruining the wood.


With that said.. DON'T USE EITHER OF THOSE THINGS ON THE FRETBOARD!!!! That would be EXTREMELY bad for it. Things you can use to clean the fretboard are:

Finger Ease - fretboard cleaner/conditioner available at any place that sells guitars

Rubbing alcohol - used sparingly of course. Don't go dumping it on your fretboard. Get a cloth/old sock/something and put a little bit of rubbing alcohol on it and wipe down each fret where need be.

Water - Again...used sparingly. Get a cloth damp in a small area and wipe down the frets. Make sure not to leave any water standing on the fretboard..that'll cause problems.

To condition the fretboard.. you can (sparingly again) use a furniture cleaner. (Pledge for example). They have oils in them that will help keep the fretboard from drying out and cracking.

Make sure that whatever you use on the fretboard is safe for whatever type of wood your fretboard happens to be.


Hope this helps.

ZeppelinAir 12-27-2007 01:50 AM

thank you, it helps a lot

PerFeCTioNThrUSileNCe 12-28-2007 11:57 PM

^UPDATE!!!!


I found out that using DENATURED alcohol instead of Isopropyl (rubbing) alcohol is better for the fretboard.


Question: what kind of guitar is it that you're talking about?

ZeppelinAir 12-29-2007 07:00 PM

electric, it lost a bit of its nice glossy look and i am looking to bring it back


All times are GMT -6. The time now is 05:56 PM.


© 2003-2024 Advameg, Inc.