![]() |
I'm still open to working on it this weekend though, should you have any other suggestions. I just know my own research will be very limited due to the other stuff I need to take care of.
|
heyo. so i bought a new computer with the intention of using it as a DAW. it has at least twice as much of everything (RAM, Storage... all that jazz) as my last computer, which did nearly fine with all my needs.
i have an issue with FL Studio 9 and the buffer settings. on my previous computer, i had the buffer set around 512 and it was able to handle roughly 50-80 tracks playing simultaneously while recording 1 live track on top. now, on my brand new HP with windows 7 (previously ran xp) i have to set the buffer up past 900 in order for it to not crackle while handling a SINGLE KICK DRUM. i haven't experimented any further with how much it can handle beyond that single kick, as a buffer set past 900 means noticeable latency while recording any dubs... essentially rendering my machine useless to me. the crackle is the issue. i'm not sure if there are settings located elsewhere on my computer that i can manipulate, as i can't find any that go beyond the choice of 5.1 surround or simple stereo outputs. perhaps it's a driver conflict or something? any help would be appreciated muchly. -z. |
Quote:
As far as buffers, 512 should be plenty... but out of curiosity, can you type out a comparison of your two computers in terms of basic specs like RAM, Processor, and HD RPMs? |
New Computer:
AMD Athlon II X2 250 Processor 3.00 Ghz 4GB RAM (ddr3, 3.75gb usable) 64-bit OS 640 GB SATA 3G (3.0 Gb/sec) 7200 rpm i can't try what you're saying right at this moment, but i think it's a good idea. i have ASIO activated and i'm wondering if the default (i think it's realtech) driver mode will work better. thanks. Old Computer Athlon 64 (0) 3500+ 2.2GHz (35W) 2gb RAM (ddr2) 7200rpm 200gb SATA |
Quote:
Ah, you're using your onboard Realtek soundcard? I seem to remember that Realtek uses AISO by default if I'm not mistaken, but I haven't used an onboard soundcard, especially Realtek, in at least 5 years so I could be mistaken regarding their current driver mode. If you switch driver modes to all the available modes and there's no change in your situation, let me know and I'll see if I can do some research for you. I hope this solves it though. I'd be surprised if it didn't, because every problem I've had and other people I know have had with the same thing you're talking about usually had something to do with the buffer size or the driver mode. Hopefully it's that simple. :) |
ok. so i've got fl working with no glitches, along with reason 4. but now there is an issue with my net browser (chrome)... no sound comes out of it. i can't watch youtube or listen to indie music from MB!!! help!
|
Quote:
|
yes. i discovered that is the issue. i can't have sound going to the browser and a music program at the same time. is there any way to make this not the case?
|
Quote:
I don't know about yours though, so it may be worth it to research it and see. |
well, being that coming on MB and hoping someone knows the answer is my form of research when it comes to computers (i don't know how to research this stuff) i think i will just leave it the way it is, and hope that i don't for some reason need audio from the net playing at the same time as audio from my music software.
thanks for your time FD. -z. |
Hey Freebase...just thought I'd stop in and update you on my PC, since you helped me so much:
I decided early this week, after not doing anything with it last weekend, to just wipe it out and do a fresh XP install. So I booted from the CD in preparation, then saw there was an option to repair an existing install, so I thought I'd give that a shot. This got me back into Windows and I was hopeful, but there were still bogus antivirus popups. However, this allowed me to go ahead and back up the remaining few things onto my external drive, so at that point why the hell NOT do a clean install? So I did it yesterday...feels kind of nice. :D I'll be bringing the PC home tonight and getting back in working order this weekend. It was a nice break not having the internet at home though, hope I don't fall back into over-usage. :laughing: |
I spoke too soon! :banghead:
Now I am dealing with a bunch of missing drivers. Couldn't even set up my damn internet connection at home...it was therefore useless AGAIN, and I brought it back to work. Slow progress getting the drivers I need. Got the net running (via office connection...who knows what'll happen next time I bring it home), now can't seem to get audio working...gotta call it a night. And I thought I was done. Goes to show it's the first time I've done a clean system install. I don't have time for this! I feel like tossing it and buying a new one. If I could...I would. |
I seem to remember someone (Freebase?) saying something about an automatic backup of your music libraries to an external drive. I mentioned something about it to my boss and was wondering if someone could repeat/explain how that would work, the search brought up nout...
|
Quote:
You should only need the following drivers: CHIPSET driver (important, if you value any kind of performance at all) Video card driver Audio card driver Ethernet controller driver Anything else, such as third-party software stuff will be installed when you install the software. |
Quote:
It's basically a small program you download for free and you set up a backup profile, which allows you to select any directories on any drives as the source, and any directories on any other physical drive (like an external) as the destination. You run the backup profile and it will copy all the directories you specified into the destination, and they'll be set up in the same way. After that, you create a synchronize profile, using the same source and destination, but this time you set it up so that when anything changes in either the source or the destination directories, running the profile applies those changes to both. There are different ways you can set it up, but the idea is that any time you add new music (or whatever else) to the source, when the synchronize profile is run, just the new stuff gets added to the destination. And if something gets deleted from the source by accident, when the synchronize profile is run, the file(s) will be restored to the source. There are different profiles you can set up, and you can also schedule them to run at certain times. Doing this will always ensure that you have a mirror copy of whatever directories (or even an entire drive) backed up on an external or other physical drive, should something happen. If you're interested, here's a tutorial from their website: http://www.2brightsparks.com/tutoria...tbackup/1.html There are also other tutorials you can check out pertaining to different scenarios. |
Thanks meeyt! :)
|
Oh shyyyy...it doesn't appear to be free after all. I'll give it a go and see if the boss is willing to spend 30$ on it...:\
|
Quote:
Edit: Hmmm... hold on a sec and let me find the right thing for you. I got mine for free, and I'm pretty sure I didn't pirate it. |
|
Oh sweet. Thanks...:)
|
Quote:
On an unrelated issue, does anyone know if it's possible to import a Favorites folder into a browser, without having exported an HTML file? Every instruction I've seen says to import the HTML file exported from another browser. Well, I don't have that...I just have the folder with all the sub-folder and links. If I drag this folder into a browser window, it does display the directory...so I could click on each link and manually re-bookmark everything and recreate all my subfolders, but that would be quite time-consuming. |
Alright... Need help please.
My Aunt just gave me a Computer that she tried to build years ago.... She said she put in a new MOBO and then when she turned it she smelled smoke. So she turned it off and the computer has been sitting there for 3 years because she didnt want to fix it. So she gave it to me... told me to see if I can fix it, I brought it home, and powered it up and the Power supply blew out a puff of smoke like a atom bomb out of the back of it. Turned it off and now am guessing I just need to replace the Power Supply... Did I damage anything by turning it on besides the Power Supply? The MOBO is a k7upgrade-600 The Powersupply is Skyhawk CTX-300WCE What do y'all think I should do get this thing working again? Its a free computer for me if I get working, be nice to have another computer around the house for web surfing or maybe giving to a friend. Thanks for any replies. |
impossible to say without looking at it. can you look inside and see what shorted? chances are you fried a lot more than just the power supply...
|
Quote:
|
well it's possible that it's just the power supply, but i wouldn't advise opening that up to check.
buying a new one and testing it out is certainly an option, but it's not exactly a cheap way to test the system. you may be better off taking it in someplace, if you know someone you can trust. unfortunately computer repair places are a lot like auto shops - they tend to charge a lot for nothing... |
^ True that.
But if you ever want to get the computer running you're going to need a new power supply anyway. Don't worry about trying to fix the power supply as those are generally field-replaceable-units and most computer repair shops won't dig into them and will advise you to get a new one anyway. First find out how much wattage you're going to need and then select an ATX power supply (with the 20 pin ATX power connector, or 4 pin +12V ATX power connector) as that's what your mobo is compatible with. When you get it installed, make sure it's switched to 110v (not 220v, unless you're somehow running 220v at your house...) and ensure everything else is plugged into the correct places on the mobo and everything is secured. Test your power strip or wall plug by plugging in a lamp or something that takes 110v AC current to ensure something isn't screwy and if that goes well, plug in your computer and let her rip. If nothing explodes/smokes/etc but you don't boot up then you've fried something else. If you go through your post routine and you hear a series of beeps and you don't boot up, let me know how many beeps and how fast/close together they were. Otherwise, if you boot fine, congrats. |
Guess Am just going to order a 20pin ATX for 25 bucks off Newegg or something, and see what happens. Ill let yall know when I get it in and plug it up..
Ya'll mind looking at my MOBO specs and giving me a decent suggestion for a PSU? The MOBO is a k7upgrade-600 |
Quote:
Here's a power supply calculator: The Original - Power Supply Calculator Offered by Journey Systems. LLC. Providing Custom PCs, Servers, Laptops, Workstations, Gaming PCs, Quality Custom Computers with 3 Year Warranty Just try to fill in what you can and it will recommend the wattage at the bottom. If you can't be specific, use the recommended wattage as a guideline and buy something with more wattage than it recommends. As far as brand is concerned, go with what you can afford but the more expensive the better. Cheap power supplies tend to do what yours did. |
Thanks for the link and the information.... Ill let ya know how it turns out.
|
Latency problem during rendering song as MP3
Freebase! Arrgh! I have a new problem with my sound recording program.
In the past when I rendered a song (created 3 months ago with Sony Acid Music Studio 7.0) as an MP3, the MP3 sounded just like what I heard within the audio program: all the tracks were in sync. But NOW when I render the same song (with minor changes) as an MP3, the new MP3 seems to sound okay for around 1 minute, and then, wtf? I start to hear that the tracks are playing out of sync with each other, some sounding faster than the others! I first noticed this problem because I have duplicate vocal tracks (one of which has several sections removed to alter the dynamics)...and they *used* to sound like one vocal track in the old MP3 I created several months ago, but now the two identical vocal tracks sound like a duet in an MP3 I rendered today! I went back to the audio program, thinking perhaps I hadn't deleted an old vocals track, and realized there was no such track. Instead, the playback of the tracks is all messed up even within the audio recording program (although it is hard to hear), but very obviously once the song is rendered as an MP3! (Whimper! Whimper!) This didn't use to happen (around 3 months ago) when I last listened to the song using Music Studio 7.0. As a test today, I opened the audio recording file and duplicated a vocal track (to make an identical track), then played both back within the program and they sounded slightly out of sync. I think all the settings (for latency compensation, etc.) are the same as when I created the song 3 months ago, when the tracks all seemed to be in sync, but something must have gotten changed (by me). I just don't know what to do to get all the tracks in sync again! What would cause identical tracks within the same song to play out of sync? The problem may relate to this: Separate but probably related issue: thinking I'd step up a little in my recording software, I ordered the next-up Sony Acid recording software, Acid Pro 7.0, around 2 months ago. Well, when I first tried playing a song using Acid Pro 7.0, (having converted the song from the older Acid Music Studio 7.0 into Acid Pro 7.0), the song played along fine for around 2 minutes, and then the sound cut out. So, I assumed I was taxing the memory of my computer, so I fiddled with some levels...buffer size or something...and managed to get the whole song to play in Acid Pro 7.0. But now when I open and listen to the song using the old Acid Music Studio 7.0 (in which it was created), I get this problem with tracks being out of phase (described in the first half of this message). I tried setting buffer sizes and audio interface latency settings back to what I thought they were before, but no luck. The other thing I noticed today is that the Acid Music Studio 7.0 program seems touchy...click on a track to mute it, then unmute, and the program freezes, becoming "nonresponsive"...whereas several months ago the program *never* froze up. I obviously don't know enough to know what I'm doing wrong...or not doing. I've temporarily given up on using Sony Acid Pro 7.0, because I thought I'd just try to finish the song in Music Studio 7.0, since that was where it was created, and the program is less complicated. Could opening an Acid Music Studio 7.0 file as an Acid Pro 7.0 file, changing buffer size there, and then later opening this new Acid Pro 7.0 file as an Acid Music Studio 7.0 file have resulted in the tracks not lining up like they did in the original Acid Music Studio 7.0 file? Say, where did your old music recording thread go up in the Artists Corner? I searched the threads you created and it appears to be GONE! (Sob!) |
@ Vegangelica:
When you zoom into the offending clips, are you sure that they're snapping properly to the same grid marker? If you zoom all the way in to the beginning of both clips and see that they're not both snapping to the same line perfectly, and their waveforms don't match up, then it's a snap-to-grid issue. This can be caused by your snap settings either being too short (like 64ths or 128ths) or disabled entirely in the new program, or migrating the song with snap settings from the previous program might have caused issues by way of a bug. If that's the issue, then you'll literally have to go through and line up all your clips to the proper positions. If it's not, let me know. As far as performance issues, make sure you're meeting the suggested system requirements for the software. If you're only meeting the minimum system requirements, you're going to have issues all the time. By the way, the recording thread is getting re-done. I'm just going to provide links to resources and answer questions instead of going overboard with info. |
Quote:
I'll look at snap settings, though, because there are other tracks where I pasted in small clips. However, when I pasted those clips I visually expanded the track as far as it can expand so that the clip appears to match up with one it is duplicating in an adjoining track. I'll doublecheck some more of the clips to see if they match visually when I expand the tracks as much as I can. Ugh! This will be hell if I have to go through each tiny clip to make sure they line up! :( Ah, well, such is life. :) Maybe I'll try opening up the same song in my newer Acid Pro 7.0 program and listen to it again...maybe the tracks will line up there! (Perhaps I'll start praying to the Audio Gods, too, and end my heathen atheist ways.) ;) Quote:
Quote:
|
If you can, can you get a large screenshot of your project and post me a link? Try to get one with two of the same clips aligned with each other so I can compare the waveforms.
As far as RAM, if you're using Vista or 7, 2 gigs of RAM is pretty much minimal for just your OS, so by making it 4 gigs, you'll actually have some memory headroom to work with in your software. |
Quote:
http://i658.photobucket.com/albums/u...ckscropped.jpg http://i658.photobucket.com/albums/u...ckscropped.jpg Quote:
|
Yea, those waveforms look right, but are those copies of a mono clip or just the left/right channels of a stereo clip?
Yea, if you're using XP 32bit you can only address 4gb of RAM, and even the OS doesn't recognize that much by default. I use XP 32bit as well and have 4gb of RAM and XP only sees 3.25 of it. If you have room, you can add one gig stick of single-channel 400mhz RAM to your existing 2gigs of what I'm assuming are dual channel. (ddr2) Don't buy anything over 400mhz, as your current RAM is 400mhz and anything higher on the third stick will have to throttle down to your slowest speed RAM (400mhz). Also, you'll want to make sure that your current RAM, if dual channel, is plugged into the right slots. The dual channel slots on the mobo will be 2 greens I think, or a different color than black or white. That's where you plug your DDR2 RAM. If you don't, they won't operate in dual channel mode. Also, you can only have a pair of dual channel, so your third stick should be single channel (ddr1). If your mobo supports triple channeling (DDR3), you can get three 1-gig sticks DDR3 and plug them into their respective slots and really raise your performance, but that's only if your mobo supports it. You can find out just by looking at the RAM slots. If there are three colored slots and one black or white slot, it supports DDR3. |
Quote:
Quote:
The technical info says they are DDR SDRAM, and I looked to see what that means...I think it is the same as DDR1, unfortunately. So, if my 2 gigs *aren't* dual channel, what are the implications? Quote:
My, this all gets rather complicated, doesn't it? You should charge us for your advice. ;) |
Yea you picked single channel. You'll need your additional RAM to be single channel as well.
The implications, well... assuming your motherboard supports DDR2, which it should if it came out any time in the last 5 or 6 years, if you had two sticks of DDR2 in the proper configuration, your RAM's data rate is significantly increased and both sticks work in tandem to handle the workload. You get better performance with DDR2, plain and simple. But yea, just buy another of the same stick and plug it in. 3 gigs is better than 2. You'll notice a performance increase for sure. I don't want to get into processors or anything, but if you ever consider a processor upgrade or even a mobo upgrade, I can help. As far as your mono clips... Recording a mono source into a stereo channel effectively does what you're doing manually, except you won't have to worry about duplicating and positioning between the two. I find that there are scenarios where I'll do that, like if I want two completely different effects on the same source so that each clip is effectively different... But if you're going for an actual stereo sound without effects, you're far better off recording two mono versions separately and wide panning them. The differences in each clip is what makes the space and wide positioning apparent. Not the fact that there are two of the same thing in each ear. Again, I don't know what you're going for but I thought I'd throw that out there. |
Quote:
Here's a new symptom of my out-of-sync tracks that may help you diagnose the problem. I realized today that if I start playing back the song in the MIDDLE, then THE TRACKS ARE IN SYNC for a little while. However, if I start playback of the song at the BEGINNING, then by the time it gets to the middle the tracks are noticeably out-of-sync...assuming the program hasn't crashed on me, which it has a tendency to do. So, this does sound like a memory problem, doesn't it? Hopefully one additional GB of RAM will allow the computer to have fewer problems storing the data or whatever it isn't doing well now. I'll buy the third stick and hope that helps. I guess this is yet another reason I should limit my songs to 3 minutes! :D These 5-minuters are too much for my system to handle...and probably almost anyone's system, esp. when I'm singing about my favorite topic! ;) |
Ok so my computer is running pretty slowly lately. For most things, its not a problem. I can browse the net and other every day things and notice an issue at all. I notice the issue when im using Skype. Calls cut off and drop, the application itself will crash and i have to open task manager to close it. Skype tells me the reason is my computer performance rather than my internet connection.
I thought it was the connection speed at first because it has dropped lately. At times im running at 500kbps or lower. However ive just had the same issue while my connection speed was around 1mbps, which is what were paying for and has proven to be a good enough speed to use Skype perfectly in the past. So as far as im concerned, this rules this possibility out. Also i dont believe it is the program itself. When Skype crashes, i go to Ooovoo and this crashes when the call connects too. If i use Skype on my phone over the 3g network, this works fine with no problems. As seen as i have the same issue on both pieces of software, i think this rules out the reliablity of Skype. I have my laptop on High Performance and running off AV power rather than battery. Now i have a 1.6ghz processor and 2gb of RAM, so as far as im aware this should be more than enough to run Skype. Ive been uninstalling programs i dont use or need as i know that too many processes running in the background at the same time could easily account for this. Ill continue to do this but to be fair, im running out of expendable programs so im thinking that this isnt the cause of the issue either. Also when the problem presents itself, ill open task manager and start to end certain applications and processes that dont need to be running, start Skype again and have the same problem. I guess my question is, could it be down to free hard drive space? I dont have much. I could get rid of about 50gb of data easily once i get my hands on my external hard drive which is currently at a friends house but could this really be whats causing it when 90% of my hard drive space that is used is mp3s and avi files and so effectively just data sitting on the hard drive rather than processes running in the background while Skype is in use? |
Mojo,
Hard drive space isn't your issue. That would only affect how much more stuff you could physically store on your hard drive. Are you on XP, Vista or 7? |
| All times are GMT -6. The time now is 01:35 AM. |
© 2003-2025 Advameg, Inc.