![]() |
I'm completely new to this Sandy Bridge overclocking thing, but I have a decent amount of experience with overclocking in general. I want to tell you what I've done to see if you see any errors in my method. I gathered all of my tips from random google searches and youtube videos.
Setup: i5 2500K (Hyper 212 Evo) ASRock Extreme3 Gen3 G.Skill 8gb 1600 9-9-9-24 Radeon HD 5770 OCZ SilentXStream 600W Antec Three Hundred Case Ambient Room: 65F - 68F Idle Temp: 24C BIOS Settings Altered (everything else is default): Multi: 45 Fixed Vcore: 1.35v Turbo Boost Power Limit: 250 (short) 200 (long) 1 (whatever third option is) Core Current Limit: 200 LLC: 5 (Stock but notable) Spread Spectrum: Disabled Stress Test Method & Results: Intel Burn Test: (4 threads, max stress, 10 pass (planning on running 50 tonight)) Load Vcore: 1.232 - 1.272 Max Load Temp: 60c A few questions I have: Is my stress testing method sufficient? Are you going to make me use P95? Are my settings good? Do you have any recommendations or warnings? I really have no clue what I'm doing with the Turbo Boost Power Limit and Core Current Limit, do they look ok? What settings do you foresee needing to be changed if I attempt a higher overclock (I will probably push it harder, maybe 65C load or so). I know I will probably have to enable PLL Overvoltage for anything much higher than this. Is it OK that I'm using a Fixed Vcore? I've seen multiple places recommend using either LLC or an Offset. My initial preference is to leave it at Fixed and just work around the vdroop (that's what I've always done before). I really want to try and keep the power saving options enabled, I plan on using this setup for a long time. Is there a problem with keeping these enabled? Additional Turbo Voltage is an option that sounds extremely scary, is it OK that I've left it on Enabled/Auto? Thanks in advance! |
If I could help you generic, I would but thats about 40 levels above my wheelhouse. I assume Freebase will have something more useful for you.
I dropped by to ask if anyone knows of a computer I could buy that would be very upgradeable. I was planning to grab a gaming computer off newegg.com for ~$800 but two medical bills and Christmas wiped out my computer funds. I'm having convulsions from lack of videogames so I'm wondering if anyone knows of something down in the $300 range that would allow me to upgrade piece by piece. |
I'm not sure this is what you were looking for, but I got bored.
prices taken from newegg many of these could be had for cheaper on ebay or wherever, but be careful. really great for the price: Intel i3 2100 - $125 Antec 300 case - $55 (45) ASRock H61M-VS 1155 mobo - $60 G.Skill Ripjaws 1600 4gb - $30 Video Card: I just bought a Radeon 5770 for $65 used, that's a pretty amazing value. If you want a new card, you will get a lot less for the money. Power Supply - $39 (27) more stuff you'll need: HDD 250gb? - Astronomical since the flood AKA $80 $432 The mobo allows you to upgrade to a better Sandy Bridge later, but the 2100 will probably work well enough for a few years. |
I'd say; No i3, no Asrock. but especially no i3. It's really the budget processor and an old Core2Duo is often faster. Literally. Go for the i5. You won't be disappointed :)
|
ASRock is one of the big 3 mobo manufacturers, they are all in close competition with one another. They make good products for the past few years.
I ran a C2D for years, and if you aren't overclocking it, the i3 is much better. The logical step up from that is the 2500K, which is a BIT much for a $300 build. |
Hey computer geeks of Music Banter. I need some free (and possibly very basic) tech support. My webcam has not been working for a week now. I have a Gateway, model # NV51B02h that was made in May 2011, and I bought it in October 2011. So it's not that old, really. It's running Windows 7 Home Premium x64 bit.
Every time I open the webcam program or any program that uses it (like Skype, f.ex.) I get a message saying the webcam's stopped working and then it says: "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." All drivers and software on this computer are up to date, including the webcam driver and software. I'm pretty good with computers, but I need some help on this one, before I take it to the store to get checked out. |
Quote:
|
Quote:
|
Try the webcam with a different computer so you can determine which piece of plastic is ****in up.
|
Quote:
Maybe there is a loose wire somewhere? The microphone works just fine, no problems there. It's just the camera... |
Quote:
Try this: - Uninstall the software. - Get a webcam software that works with most webcams... you might try the free one here. If that program lets you access your webcam and it seems to be operating correctly, then the specific software for your webcam is what's causing the problem, and we can go from there. If that program (or another one like it) doesn't yield success, you might look into bringing the laptop in to a repair shop. |
Quote:
|
Before you do anything, and I know this seems like a stupid idea but... well, experience.
Try just plugging it into another USB port and see what happens. There might be nothing wrong with your usb port, but sometimes drivers suddenly work again when you plug something into another port. You might want to change it back again afterwards, might still work. I've had this problem throughout the years with many different PC's and loads of different hardware like scanners, webcams, keyboards. I've given up trying to find out what causes it :D. |
Quote:
|
Quote:
(I knew that from reading her previous comments.) :D |
This has probably been asked before and I feel sort of silly for asking but how does one get a .gif to animate in their avatar and/or how do you resize your avatar to something bigger than the allotted 80 x 80?
|
Quote:
If you have an animated .gif that you'd like to use as your avatar but it's larger than the size restrictions listed in the Avatar Requests thread, HERE is a free program you can use to resize the .gif without losing the animation. After you resize it, simply upload it to a hosting service and use the direct link when you request your avatar change. |
What's the best/cheapest way to get my laptop cleaned inside? It's overheating and it will blow my graphics card if I don't sort it soon. I am not going to pay the money stealing Indian down the street charge $280 just to open the damn thing.
|
How much is it overheating by, what does the card load at? Video cards run quite hot.
|
Quote:
|
Usually 90c isn't an issue, but it might be on a laptop. I've never had one so I couldn't say.
|
90c is not good at all, whether it's in a laptop or a desktop. The components can take high spikes at those temps, but for an extended period of time it's going to kill them prematurely.
Laptops usually have higher temps due to the compacted nature of the setup and the airflow disadvantage, but the sensitive parts still have the same limitations when it comes to how much heat they can withstand over extended and consistent periods of time. If a person is experiencing unusually high temps in a laptop, the first thing they should do is make sure they're not resting a laptop with bottom air vents on bed comforters and restricting air flow (which is probably the case 90 percent of the time). Also, if the fans are giving out or are no longer operable, that's obviously going to have an effect. Assuming the fans are still running and the vents are not being obstructed, one way to lower the temps would be to underclock the CPU and RAM, provided the BIOS provides that capability on the laptop. If not, there should at least a setting in the BIOS to have the fans run at high speed constantly instead of letting the motherboard control the fan speed in response to temperatures, should there be a faulty heat sensor or fan control module. Battery power would be affected somewhat, but it beats a dead computer. |
Quote:
|
Quote:
When you know (or just wanna try) the key, restart the computer and when the screen goes black, just keep hitting the key repeatedly until it boots into the bios. From there, it's just a matter of scrolling through the options until you find any relevant settings. Alternately, you can give me the make/model of your computer and I can search for what bios it has and explore the options myself to let you know if there's something you can do in it, and what to do. |
Hey guys, I'm interested in getting a new tower that doesn't cost me an arm and a leg. I'm looking for one with at least 1tb of memory.
|
What are you using it for?
I think I might actually bite the bullet and grab this: 2TB HDD for $130 It was the best price/storage ratio that I noticed on newegg. |
Quote:
|
I've accidentally clicked the "Mark Forums Read" bit right above the shoutbox and I don't know how to reverse it. Can somebody show me a way to reverse this please?
|
Quote:
|
Okay, I guess that I can live with that. I guess I just have to be more attentive.
|
Ever since I got my new PC config set up I have been trying to stress the system.
Intel 2500K @ 4.4ghz / 1.28v loaded max vdroop (1.41v BIOS) / 65c max Radeon 5770 @ 925 / 1400 8gb G.Skill DDR3 1600 Samsung 830 64GB SSD OCZ 600W PSU BD Burner Antec 300 case Audinst HUD-mx1 > Sennheiser HD600 23.6" Samsung monitor I ran all the hardcore stress tests while overclocking, but I wanted to see if I could make it stutter during normal use. I could do more, but I don't think I'd ever really run more stuff than this. http://i.imgur.com/TrUYy.jpg With all of this up, everything still runs as fast as opening the first program. I had a e8400 C2D and the difference is night and day. Running the encodes ensures that CPU usage very high. The only issue I've had is that sometimes foobar will bug out and a song will skip once every 6hr or so. I don't think I'll be needing to upgrade for a while. I could see grabbing a budget next gen nvidia card if I ever got into a super high demanding game like Battlefield. I usually stick with less demanding games like SC2, Diablo 3 and CS:Source. |
I picked up a bulk of >1000 viruses/trojans/harmful **** yesterday from somewhere. I can only run my laptop in safe mode otherwise it crashes. System restore won't open, when I access the system repair on bootup it says there are no restore points. Haven't got any backups, dunno where my windows disc is.
How can I fix this? I was gonna get a friend of a friend to take a look but I'd rather solve it myself if anyone can help. Any advice anyone has would be greatly appreciated cheers ****nugget ****stain Windows 7 Samsung 3,00GB ram 32 bit operating system Celeron (R) Dual-core CPU T3500 @ 2.10GHz 2.09GHz ...deleted my backups from the backup drive and used it to store porn... |
Quote:
If you are unable to install Malwarebytes in safe mode, let me know. You'll have to mess around in the registry. |
Cheers for the reply, man. I managed to get onto the site but when I run the installer I just get an outline with an empty box. Don't worry about explaining the registry I think I'll leave it because I've at least got a bit of basic surfing for now, don't wanna mess with that so I'll give it to the friend of the friend on Tuesday.
I tried running "speedmax pc" earlier to try and clear up some malware, but as soon as it finished scanning it was asking me to pay money and register same as my anti virus software. Someone has managed to screw my laptop over pretty well heh I couldn't get malwarebytes running but if anyone else is having problems I downloaded these programs to sort out my laptop and it's running ok for now Free Windows Registry Repair Rising PC Doctor (Trojan killer) Comodo (firewall) Super Anti-spyware freeware CC cleaner (unneccessary file cleanup) And 1 more that I'm not gonna tell you in case someone is using this to figure out a way to **** me over again! Those are all freeware and do what it says on the label. Some of them can be upgraded but will work fine free. I went through a lot of programs which claim to be free and then ask money to fix things like Regclean Pro etc before I found these. Thanks for reccomending looking at fixing the registry Freebase that saved me some weed money! :thumb: Tried malwarebytes and avast in normal bootup and they installed, barring another blue screen that's actually my laptop saved from critical state, ****ing awesome \m/ |
I want to be able to copy source(not re-encoded) video files from my DVR to my PC as painlessly as possible(HD channels). I hear that TiVo DVRs have the ability to copy files to PC. Are these files encrypted or are they clean source files? I want to be able to re-encode for size.
I have Comcast internet, and apparently I can use something like this with it if I use a Cablecard decoder from comcast. The other option is grabbing a Hauppage HD PVR for way more money. |
Whats a computer?
|
Ok not computer tech but programming question. Any AppleScript gurus on site? I need to read a text file into a list to automate ftp upload of a bunch of files. I know most of it but just don't know how to format the text file when I write it so the AppleScript can read it and parse it into a list for processing.
Something like {site: 'www.musicbanter.com', user: 'fazstp', password: 'analbeads', file_list: {'Mac HD/Users/fazstp/Desktop/Files/0001.jpg', 'Mac HD/Users/fazstp/Desktop/Files/0002.jpg', 'Mac HD/Users/fazstp/Desktop/Files/0003.jpg'}} Edit: Might give this XML format a try - Parse XML with AppleScript |
I updated my computer to Windows 7 last night, since I have lost my webcam software, Realtek audio and when I'm typing it jumps to random parts of the sentence and types there, anyone got any ideas where I could get the stuff I need?
|
and knows how to fix the stupid keyboard thing, that annoys me most. My sound quality is **** without that Realtek audio btw.
|
Quote:
|
| All times are GMT -6. The time now is 10:57 PM. |
© 2003-2025 Advameg, Inc.